DD4 - Surveillance,Mapping & Inspection

Software

The flight plan is prepared with the help of easy to use software either in advance or at the site. The UAV is capable of executing all the missions designed from the Ground Control Station (GCS).

The UAV pilot has to just press START button and UAV gets operational as desired by the operator. The UAV can perform the entire mission in automatic mode under the control of the operator, and mid-flight missions can be changed in real-time.

All parameters can be modified before and during the flight, including:

Flight Route
Waypoints
Areas to be Monitored

Point of Interest
Height Modifications
Speed Modifications

In addition, the autopilot has selectable fail safe phases (return to home, emergency landing, etc.) in situations such as low battery, poor data link quality, or flight outside the safety area allowed by the pilot.

Ground Control Station

It is the terminal that integrates the Control Software of the UAV and from which the handling orders are sent to the aircraft, through the 5G LTE in it. The variations in the flight plan are made from the Control Command Station we will receive the real-time images collected by the Electro-Optical or Infrared sensors situated in the Gimbal of the UAV or Sensor data. We will receive the real-time video signal on the monitor.

The operating distance is 12 km, AES 128 Encrypted Radio Data Link and Improved Precision GPS System included along with precision landing and integrated with auto docking station, where drone land and charge autonomously.

UAV Detailed Description

Cloud Controlled, 5G LTE Enabled and Integrated with auto docking station

Specifications